Wi-Fi Hacking(Wifi Hacking Trick)

Wi-Fi Hacking

Wireless local-area networks – also called Wi-Fi networks or WLANs – are very popular. 

They are installed in offices, hotels, coffee shops, and homes...

This tool is the most possible way will help you crack 

wireless networks never so easily!

Bonus tool: WifiHackBeini122, hack any wifi, wireless networks just in a few steps.

Free download 

Cracking WiFi Connections

How to hack a wifi network in a few minutes !

Most of the time, it is possible simply to either
have a laptop with WiFi or a PC with WiFi and connect to open networks
with the Windows built-in WiFi client.

Everyone has lots of internet connections
around their house, and frequently these connections are wireless.
Cheap, free, and easy wireless internet

Bonus tool: Commview for Wifi 6.3 build 695

Download here

WiFi Cracker AIO Tools

 

All tools you need to bypass Wifi. Easiest way
to crack wireless network keys !

A lot of helpful wifi, wireless tool. You can now
use free internet from everywhere.

List of tools:

+ CommView for Wifi
+ Wep Key Recovery
+ Pure Networks Magic
+ Easy Wifi Radar
+ AirCrack
+ Boingo Wireless v1.3
+ APSniff
+ Aerosol
+ ... and many other wifi, wireless tools.

Download WiFi Cracker

 

AIO MSN Hack Tools

 

A lot of MSN hack tools you can found here !

A must have tool for MSN users.

MSN hack tools include in this package:
+ MSN7UniversalPatcherPlus
+ Msn Auto Responder
+ MSN Flooder
+ MSN Hacker
+ MSN passwords
+ MSN Spy Lite v1.0
+ MSN Chat Monitor and Sniffer v3.2 include keygen
+ MSN Sniffer v1.2 with crack
+ MSN block check
+ MSN Password Retriever
+ ...

Download Here  (server 1)

Download here  (server 2)

 

 How To Hack A WiFi Network Both WEP and WPA Passwords 2012

Today ill tell you, how to hack WiFi Using Some Simple And Working Tricks You Can easily hack the WiFi network. I think you know that if you want to lock down your WiFi network, you will use WPA encryption because the WEP encryption is easy to crack. In this tutorial we will tell you how to crack WEP passwords, an older and less often used network security protocol. If the network you want to crack is using the more popular WPA encryption, See Below For Second Tutorial.

In This step-by-step tutorial, how to crack a Wi-Fi network with WEP security turned on.

Requirements For WiFi Hacking :-

1. Unless you’re a computer security and networking ninja, chances are you don’t have all the tools on hand to get this job done. Here’s what you’ll need: A compatible wireless adapter—This is the biggest requirement. You’ll need a wireless adapter that’s capable of packet injection, and chances are the one in your computer is not.

2. A BackTrack Live CD

3. A nearby WEP-enabled Wi-Fi network. The signal should be strong and ideally people are using it, connecting and disconnecting their devices from it. The more use it gets while you collect the data you need to run your crack, the better your chances of success.

4. Patience with the command line. This is an ten-step process that requires typing in long, arcane commands and waiting around for your Wi-Fi card to collect data in order to crack the password. Like the doctor said to the short person, be a little patient.

Crack That WEP

To crack WEP, you’ll need to launch Konsole, BackTrack’s built-in command line. It’s right there on the taskbar in the lower left corner, second button to the right. Now, the commands.

First run the following to get a list of your network interfaces:

airmon-ng

The only one I’ve got there is labeled ra0. Yours may be different; take note of the label and write it down. From here on in, substitute it in everywhere a command includes (interface).

Now, run the following four commands. See the output that I got for them in the screenshot below.


airmon-ng stop (interface)
ifconfig (interface) down
macchanger --mac 00:11:22:33:44:55 (interface)
airmon-ng start (interface)


How to Crack a Wi-Fi Network’s WPA Password with Reaver :-

Here’s the bad news: A new, free, open-source tool called Reaver exploits a security hole in wireless routers and can crack most routers’ current passwords with relative ease. Here’s how to crack a WPA or WPA2 password, step by step, with Reaver—and how to protect your network against Reaver attacks.

Requirement For WiFi Hacking :-

The BackTrack 5 Live DVD. BackTrack is a bootable Linux distribution that’s filled to the brim with network testing tools, and while it’s not strictly required to use Reaver, it’s the easiest approach for most users.

• A computer with Wi-Fi and a DVD drive. BackTrack will work with the wireless card on most laptops, so chances are your laptop will work fine. However, BackTrack doesn’t have a full compatibility list, so no guarantees. You’ll also need a DVD drive, since that’s how you’ll boot into BackTrack. I used a six-year-old MacBook Pro.
• A nearby WPA-secured Wi-Fi network. Technically, it will need to be a network using WPA security with the WPS feature enabled. I’ll explain in more detail in the “How Reaver Works” section how WPS creates the security hole that makes WPA cracking possible.
• A little patience. This is a 4-step process, and while it’s not terribly difficult to crack a WPA password with Reaver, it’s a brute-force attack, which means your computer will be testing a number of different combinations of cracks on your router before it finds the right one. When I tested it, Reaver took roughly 2.5 hours to successfully crack my password. The Reaver home page suggests it can take anywhere from 4-10 hours. Your mileage may vary.

How To Hack WiFi network :-

Step 1: Boot into BackTrack.

Step 2: Install Reaver

1. Click Applications > Internet > Wicd Network Manager
2. Select your network and click Connect, enter your password if necessary, click OK, and then click Connect a second time.

Now that you’re online, let’s install Reaver. Click the Terminal button in the menu bar (or click Applications > Accessories > Terminal). At the prompt, type:

apt-get update

And then, after the update completes:

apt-get install reaver

Step 3: Gather Your Device Information, Prep Your Crackin’

Find your wireless card: Inside Terminal, type:

iwconfig

Put your wireless card into monitor mode: Assuming your wireless card’s interface name is wlan0, execute the following command to put your wireless card into monitor mode:

airmon-ng start wlan0 Find the BSSID of the router you want to crack 

Step 4: Crack a Network’s WPA Password with Reaver

reaver -i moninterface -b bssid -vv 

For example, if your monitor interface was mon0 like mine, and your BSSID was 8D:AE:9D:65:1F:B2 (a BSSID I just made up), your command would look like:

reaver -i mon0 -b 8D:AE:9D:65:1F:B2 -vv

Read more »

Hack Any WIFI Password Network And use Unlimited Free Internet (Hacking Trick)

First you have to know what is Wi-Fi and how dose it work? 

"Wi-Fi" is a type of wireless networking protocol that allows devices to communicate without cords or cables.

1: Wi-fi uses antennas around which wi-fi "hotspots" are created. The hotspots are outlets equipped to receive the radio waves that power wireless networking. Until recently, wi-fi has been confined to more than 10,000 hot-spots in cafes, bars and airport lounges. But various projects are under way to set up city-wide zones, where a series of antennas are installed in the streets, on lampposts or street signs. The hotspots around them together create a much wider area of coverage. Norwich has a mesh network which links each lamppost antenna to the next creating a seamless wi-fi hotspot around the center of the city.

2: The source internet connection is provided by a PC or server to which the antennas are connected either wirelessly or via a cable.

3: Some mobile phones and personal digital assistants (PDA) now have wi-fi chips installed. With mobile phones, this means conventional networks can be bypassed and inexpensive long-distance calls made over the web (using Voice over Internet Protocol, VoIP).

4: Many laptops and handheld computers now come with built-in wi-fi connectivity; it is also possible to add wi-fi to your computer with a special card that plugs into a port on your laptop.

Some organizations provide it for free but maximums provide it for business purpose only. And you have to give a password to access this kind of network.

This software price is $1099. Don't worry, I'm giving you for FREE.

Download This Software from Here  [Mediafire Link]

Note: Please turn off your anti-virus program before you install this software, otherwise this software will not work properly. After completing installing process you can re-run your anti-virus program.

Now follow the Instructions bellow:

1. Install the software and drivers.

2. Click on ‘Rules’ tab and tick on ‘Enable advance rules’ option.

3. Type ‘a’ on Name box and Past this code on formula box “tods=1 and dmac=FF:FF:FF:FF:FF:FF” like picture bellow. Then click ‘add/edit’ button.

4. A window will appear like the picture bellow. Give a tick on ‘a’ .

5. Then go to ‘Settings’ and click ‘Option’

6. Go to ‘Memory Usage’ tab and set everything just like this picture & click ‘Ok’ (Restart may be required).

7.  Check ‘D’ funnel and uncheck another two funnel from the right top of this window.

8. Click ‘Search’ button and find the network that you want to creak.

9. Then drag it on ‘Channel’ tab and click ‘Capture’ button.

10. Now which one is do not capturing anything give it to password protected network and connect it. When it will ask for password, give any as you wish.

11. It will show this massage “Connected with limited connectivity”.

(I have no Wi-Fi connections at this time. that is why, I can’t share some screenshots).

12. Click on main menu again and then click on ‘Packets’ Tab. If everything was all right, you will see some Couple of Packets.

13. Click right button on “ARP REQ”  Packet and then > “Send Packet(s)” > Selected.

14. This menu will appear.

15. Now change all values just like this and click ‘Send’.

16. Go to ‘Rules’ Tab again and uncheck the Rules “a” .

17.  Select first 20000 packets and save it. Make sure you are saving it as “dump cap” file in place of “ncf” file format. (I have no Wi-Fi connections this time, that is why I can’t share some screenshots).

18. Now download a zip folder named “Aircrack-NG” from HERE And extract it.

19. Open ‘bin’ folder and run this file ‘aircrack-ng-GUI.exe’. Then go where you saved the packets, select all and click launch.

20. An ‘IV’ list will came. Select the network that you want to creak.

21. Click ‘Connect’. You will be connected with your desire network like a magic !

22. Enjoy the Unlimited Wi-Fi Internet.

Also you can do with this software :

Done!!!

Read more »

How To Hack Facebook Account Using Firesheep(Facebook trick)

Firesheep make facebook hacking easy

Recently a new firefox addon Firesheep have been a cause of thousands of email accounts, As reported by techcurnch, Firesheep has been downloaded more than 104,000 times in roughly last 24 hours, With Firesheep the hacker can control any account without even knowing the username and password of the desired account, As Facebook is worlds most popular Social Networking website, therefore it has been the major victim of it, Firesheep uses Http Session hijacking attack to gain unauthorized access to a Facebook or any other account

What is Session Hijacking?

In a Http session hijacking attack an attacker steals victims cookies, Cookies stores all the necessary Information about one’s account , using this information you can hack anybody’s account and change his password. If you get the Cookies of the Victim you can Hack any account the Victim is Logged into i.e. you can hack Facebook Google, Yahoo, Orkut, Flickr etc or any other email account

How can a Hacker use Firesheep to Hack a Facebook or any other account?

Now I will tell you how can a hacker use firesheep to hack a facebook or any other account, You will need the following things:

• Public wifi access
• winpcap
  
• Firesheep(Download)

Method

1. First of all download "Firesheep" from the above link and use the "openwith" option in the firefox browser

2. Once you have installed firesheep on firefox web browser, Click on view at the top, then goto sidebar and click on Firesheep
3. Now click on the top left button "Start capturing" and it will start to capture the session cookies of people in your wifi network, This will show you the list of those people whose cookies are captured and have visited unsecured website known to firesheep, Double click on the photo and you will be logged in instantly
Must comment.

Read more »